floor Price/Ceiling Price
- Part Number:
- Supply Ability:
- What is this?
|Core :||AVR||Processor Series :||ATMEGA16x|
|Data Bus Width :||8 bit||Maximum Clock Frequency :||8 MHz|
|Program Memory Size :||16 KB||Data RAM Size :||1 KB|
|On-Chip ADC :||Yes||Operating Supply Voltage :||2.7 V to 5.5 V|
|Package / Case :||TQFP-44||Mounting Style :||SMD/SMT|
The ATMEGA16L-8AU is one member of the ATMEGA16L series.It has the following features including (1)nonvolatile program and data memories;(2)special microcontroller features;(3)operating voltages;(4)131 powerful instructions most single-clock cycle execution.
The ATMEGA16L-8AU is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATMEGA16L-8AU achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.Typical values contained in this datasheet are based on simulations and characterization of other AVR microcontrollers manufactured on the same process technology. Min and Max values will be available after the device is characterized.The ADC Noise Reduction mode stops the CPU and all I/O modules except Asynchronous Timer and ADC, to minimize switching noise during ADC conversions. In Standby mode, the crystal/resonator Oscillator is running while the rest of the device is sleeping.This allows very fast start-up combined with low-power consumption. In Extended Standby mode, both the main Oscillator and the Asynchronous Timer continue to run.
The ATMEGA16L-8AU provides the following features: 16K bytes of In-System Programmable Flash Program memory with Read-While-Write capabilities, 512 bytes EEPROM, 1K byte SRAM, 32 general purpose I/O lines, 32 general purpose working registers, a JTAG interface for Boundary-scan, On-chip Debugging support and programming, three flexible Timer/Counters with compare modes, Internal and External Interrupts, a serial programmable USART, a byte oriented Two-wire Serial Interface, an 8-channel, 10-bit ADC with optional differential input stage with programmable gain (TQFP package only),a programmable Watchdog Timer with Internal Oscillator, an SPI serial port, and six software selectable power saving modes. The Idle mode stops the CPU while allowing the USART, Two-wire interface, A/D Converter, SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the Oscillator, disabling all other chip functions until the next External Interrupt or Hardware Reset. In Power-save mode, the Asynchronous Timer continues to run, allowing the user to maintain a timer base while the rest of the device is sleeping.
|Category||Integrated Circuits (ICs)|
|Program Memory Size||16K x 8|
|RAM Size||1K x 8|
|Number of I /O||32|
|Package / Case||44-TQFP|
|Program Memory Type||FLASH|
|EEPROM Size||512 x 8|
|Data Converters||A/D 8x10b|
|Operating Temperature||-40°C ~ 85°C|
|Connectivity||I²C, SPI, UART/USART|
|Peripherals||Brown-out Detect/Reset, POR, PWM, WDT|
|Voltage - Supply (Vcc/Vdd)||2.7 V ~ 5.5 V|
|Lead Free Status||Lead Free|
|RoHS Status||RoHS Compliant|
|Other Names|| ATMEGA16L 8AU|