MAX4630 Selling Leads, MAX4630 Datasheet PDF

    The MAX4620/MAX4630/MAX4640 low-voltage, high-ESD-protected, quad, single-pole/single-throw (SPST) analog switches are pin-compatible replacements for the industry-standard 74HC4066 analog switch. The normally open (NO) and normally closed (NC) pins are protected against ±15kV electrostatic discharge (ESD) without latchup or damage. Each switch can handle Rail-to-Rail®analog signals. The off-leakage current is 0.5nA at +25°C. These analog switches are suitable for low-distortion audio applications and are the preferred solution over mechanical relays in automated test equipment or applications where current switching is required.

     They have low power requirements (0.5µW), require less board space, and are more reliable than mechanical relays. Each device is controlled by TTL/CMOS input voltage levels and is bilateral. These switches feature guaranteed operation from a +2V to +12V single supply, making them ideal for use in battery-powered applications. The on-resistance is 70Ωmax, matched between switches to 0.5Ω(typ), and flat (2Ωtyp) over the specified signal range. The MAX4620 has four NO switches, the MAX4630 has four NC switches, and the MAX4640 has two NO and two NC switches. These devices are available in 14-pin TSSOP, SO, and DIP packages.

V+ to GND..............................................................-0.3V to +13V
IN_, COM_, NO_, NC_ to GND (Note 1)........-0.3V to (V+ + 0.3V)
Continuous Current (NO_, NC_, COM_)...........................±10mA
Peak Current (NO_, NC_, COM_, pulsed at
1ms 10% duty cycle)........................................................±30mA
ESD Protection per Method IEC 1000-4-2 (NO_, NC_)
Air-Gap Discharge..............................................................±15kV
Contact Discharge...............................................................±8kV
ESD Protection per Method 3015.7
V+, GND, IN_, COM_.........................................................±2.5kV
NO_, NC_...........................................................................±15kV

Continuous Power Dissipation (T_A= +70°C)
14-Pin TSSOP (derate 6.3mW/°C above +70°C).............571mW
14-Pin DIP (derate 10mW/°C above +70°C)...................800mW
14-Pin SO (derate 8mW/°C above +70°C)......................640mW
Operating Temperature Ranges
MAX46_ _E_.......................................................-40°C to +85°C
Storage Temperature Range............................-65°C to +150°C
Maximum Die Temperature...............................................+150°C
Lead Temperature (soldering, 10s)..................................+300°C