Description:
...The DMA transfer can be halted at any time by resettingthe USBN9602 DMA request enable bit. If the USBN9602DMA request enable bit is cleared during the middle of aDMA cycle, the current cycle is completed before the... ...Full Speed Function Controller With DMA Support1.0 General DescriptionThe USBN9602 is an integrated USB Node controller com-patible with the USB Specification Versions 1.0 and 1.1.... ...MODE[1:0] = 11: Mode 3: reserved??Note: Mode 3 also selects the MICROWIRE interface mode in the USBN9602, but this mode should be reserved to preserve compatibility with future devices.6 I DACK Active-low DMA Acknowledge. This pin is only used if DMA is enabled. If DMA is not used, ...